Plug & Play Plumbing Accessories for Pump Installation

The new Easyfix 32 Single and Easyfix 32 Duo installation sets for easy sump installation of one or two drainage pumps save valuable working time. The sets are ready to plug in and all necessary components such as guide rail systems, pipes, adapters, and fittings are pre-assembled up to the connection to the discharge pipe.

With the new EasyFix installation sets, drainage pumps are installed quickly and easily in the sump:

• Single and duplex pump stations

Installing pumps in basements is often a challenge due to narrow and inaccessible shafts. With the pre-assembled EasyFix 32 Single or EasyFix 32 Duo installation sets, submersible drainage pumps can be installed as single or duplex units with minimal (time) effort.

• Pre-assembled and ready to plug in

The sets are ready to plug in and all necessary components are pre-assembled on a base plate up to the connection to the pressure line.

• Suitable for narrow sumps

Depending on the pumps and float switches used, the EasyFix Single requires a footprint of approx. 400 x 250 mm, the EasyFix Duo for duplex systems manages with 500 x 500 mm.

• Inside and outside buildings

The EasyFix sets are suitable for installation both inside and outside buildings.

• Control unit included

The EasyFix 32 Duo includes the EasyLogo control unit. This regulates the alternating operation of the two pumps and ensures alarm messages and peak-load operation. The pumps are switched via their attached float switches, so no external level control such as ball float switches are required.

• Compatible for different pump types

The U3KS, U3KS Spezial and U6KES can be connected to both EasyFix sets. The pumps are not included in the scope of delivery. The use of the special float for low switching heights (pump accessory) is possible.

Contact and ask our Sales Department about the PTS/Jung Easyfix today!